General installation instructions:
The mud guards must be fastened with at least 4 screws. It is important that the correct body-rings are being used for assembly. We recommend M8 screws with body-rings 30 x 8 x 2 mm.
The two most common assembly methods are:
Fixing on brackets:
This installation method is mainly used for boat trailers. The mud guard must be fixed on both the front and the rear bracket with at least 2 screws. The brackets should be at least 30 mm wide.
Fixing on the side of the trailer:
All mud guards in the catalog indicated with an have a European hole pattern. At least 4 of these holes should be used for the mounting on the side of the trailer. Here it is also important that the recommended body-rings are used.